基于最小隶属度偏差的作战通道模糊优选

作战通道的优选对于充分发挥武器装备的效能,提高水面舰艇的作战能力具有十分重要的意义.通过分析作战通道效能评估的指标因素,确定指标相对优属度,应用最小隶属度偏差法,建立了作战通道的模糊优选模型,求解后得出了在该原则下的通道评估结论,为作战通道的优选提供了一种比较科学的定量分析方法.最后通过实例仿真计算得出了多条作战通道的优劣排序,为海战指挥员的科学决策提供参考.     

我国边境法制建设中需要重点完善的方面

在国家法制建设不断推进的背景下，我国边境法制建设的某些方面还不够完善，需要加快立法进程，尽快制定全国统一的陆地国界法，为陆地边境管理提供法律依据；完善海上边防管理法规，为维护国家海洋权益提供法律保障；加紧出台统一的出入境法典，整合出入境法律体系；完善打击“三股势力”和跨境犯罪的法律制度，维护边境安全稳定。     

操纵手考核成果的操纵手模型参数辨识

以半自动跟踪的人机系统为研究对象,从工程实际中提取了描述操纵手操控水平的指标集:静态灵敏度、平均超差度及平均超差频率指标,并依据这些指标的考核结果,构建了一种操纵手数学模型的辨识方法.最后由靶场试验数据辨识了相应的模型参数,从而验证了该方法的可行性.     

系统综合评价指标体系构建方法研究

针对目前指标体系构建存在的问题,以科研工作绩效评估指标体系构建为例,给出了一种构建指标体系的方法。该方法首先利用德尔菲法,提出影响综合评价的因素;在此基础上,引入贴近度和模糊聚类分析的方法,对影响因素进行分层和分类处理,利用效度判断法和稳定性系数判断法对得到的初步指标体系进行优化,最终得到评价指标体系。     

基于多指标相似性的T/R组件剩余寿命融合预测方法

为实现对T/R组件剩余寿命的准确预测，及时掌握装备当前健康状态和提高装备维修保障水平，分析T/R组件的故障特点，筛选出反映T/R组件状态退化过程的状态监测指标，通过计算每个指标对应的剩余寿命信息和权重，得到T/R组件的剩余寿命预测结果。通过算例分析与比较，验证了预测方法的实用性与有效性。研究结果可为电子装备剩余寿命预测提供理论指导，对合理计划维修资源和提高装备战斗力具有重要意义。     

开口电极在海水中的电场特性研究

利用稳恒电磁场理论,通过基本假设和单个电极电场计算公式的推导,计算了某一深度平面的电场值,绘制了平面分布图。接着利用相似理论进行了模型缩比实验,测量了二电极电场在某一平面上的分布值,绘制了平面分布图,进行了基本特性分析。该结果对进行船舶电场模拟和海缆断点探寻等工作,具有很好的参考价值。     

Effect of tool rotational speed on the particle distribution in friction stir welding of AA6092/17.5 SiCp-T6 composite plates and its consequences on the mechanical property of the joint

This study investigates the effect of tool rotational speed (TRS) on particle distribution in nugget zone (NZ) through quantitative approach and its consequences on the mechanical property of friction stir welded joints of AA6092/17.5 SiC_p-T6 composite. 6 mm thick plates are welded at a constant tool tilt angle of 2° and tool traverse speed of 1 mm/s by varying the TRS at 1000 rpm, 1500 rpm and 2000 rpm with a taper pin profiled tool. Microstructure analysis shows large quantity of uniformly shaped smaller size SiC particle with lower average particle area which are homogeneously distributed in the NZ. The fragmentation of bigger size particles has been observed because of abrading action of the hard tool and resulting shearing effect and severe stress generation due to the rotation of tool. The particles occupy maximum area in the matrix compared to that of the base material (BM) due to the redistribution of broken particles as an effect of TRS. The migration of particles towards the TMAZ-NZ transition zone has been also encountered at higher TRS (2000 rpm). The microhardness analysis depicts variation in average hardness from top to bottom of the NZ, minimum for 1500 rpm and maximum for 2000 rpm. The impact strength at 1000 rpm and 1500 rpm remains close to that of BM (21.6 J) while 2000 rpm shows the accountable reduction. The maximum joint efficiency has been achieved at 1500 rpm (84%) and minimum at 1000 rpm (68%) under tensile loading. Fractographic analysis shows mixed mode of failure for BM, 1000 rpm and 1500 rpm, whereas 2000 rpm shows the brittle mode of failure.     

Experimental investigation on dynamic response and damage models of circular RC columns subjected to underwater explosions

Reinforced concrete (RC) columns are widely used as supporting structures for high-piled wharfs. The study of damage model of a RC column due to underwater explosion is a critical issue to assess the wharf’s antiknock security. In this study, the dynamic response and damage model of circular RC columns subjected to underwater explosions were investigated by means of scaled-down experiment models. Experiments were carried out in a 10.0 m diameter tank with the water depth of 2.25 m, under different explosive quantities (0.025 kg–1.6 kg), stand-off distances (0.0 m–7.0 m), and detonation depths (0.25 m–2.0 m). The shock wave load and dynamic response of experiment models were measured by configuring sensors of pressure, acceleration, strain, and displacement. Then, the load distribution characteristics, time history of test data, and damage models related to present conditions were obtained and discussed. Three damage models, including bending failure, bending-shear failure and punching failure, were identified. In addition, the experience model of shock wave loads on the surface of a RC column was proposed for engineering application.     

基于改进支持向量机的航空装备维修安全评估

传统航空装备维修安全评估大多采用定性评估方法,针对传统评估中存在主观性、随意性过强,实践中缺乏可操作性等问题,提出了基于核密度估计的改进支持向量机。构建了航空装备维修安全评估指标体系,在利用层次分析法对其权重进行计算的基础上,通过改进支持向量机对某单位航空装备维修状况进行了全面评估,为航空装备维修安全评估提供了科学的方法,对确保航空装备维修安全具有较强的理论和现实意义。     

基于正态分布曲线的分段式变步长LMS算法

针对传统最小均方误差(Least Mean Square, LMS)自适应滤波算法由于步长固定,在解决稳态误差与收敛性之间的关系时,始终处于矛盾状态的问题,在对传统的固定步长LMS自适应滤波算法分析的基础上,根据变步长LMS自适应滤波算法的步长调整原则,通过构造步长因子与误差信号的非线性函数,提出了一种基于正态分布曲线的分段式变步长LMS自适应滤波算法,并分析了参数取值对算法性能的影响。针对实际信号处理过程中参考信号难以选取的问题,提出了一种基于分裂阵的参考信号选取方法。理论和海试数据分析结果表明:该算法的收敛速度和稳态误差明显优于固定步长的LMS自适应滤波算法和基于Sigmoid函数的变步长LMS自适应滤波算法。